Fig. 5.16. Tags combining to install the module
NOTE Contact module can not twist when lifting. When removing and installing, make sure that the label (arrows) are located opposite each other, as shown in Figure 5.16. Setting Set column module (CIM). Connect and lock the wiring harness connector and attach the wiring harness in the holder. Tighten the 3 bolts. Attach the bottom facing the steering column. Install the ignition socket and tighten the 5 screws fastening. Install the steering. Connect the battery pack. NOTE When replacing the control unit, after connecting the control unit, do programming with the instrument CLOSE 2. Program volatile memory.
Replacing the steering column NOTE Before installing the system, acting upon the air bag, observe security measures for pyrotechnic systems. Withdrawal Lock the steering Set the steering in the position of the rectilinear motion. Remove the ignition key. Give the trigger lock the steering column. Remove the pad upholstery of the driver.
419
