Fuel Tank

Setting

Check fuel level sensor. Set in the guide. Install the module.

Fig. 2.288. Mounting module: 1 -

Latch

Set 4 latch (Fig. 2.288).

NOTE Latches should hear a click to get in touch.

Connect 2 connector wiring harness with a lid. Close the module locking disc. Replace the cover with a new gasket, using a special tool KM 797. Clockwise. Connect the fuel lines and quick connect coupling. Connect the wiring harness connector. Close the lid. Bend in the direction of noise isolation. Install the rear bench seat. Attach the 2 time. Crush and lock in place. Close both rear doors. Connect the battery pack. Connect the clip weight to the conclusion that mass. Program volatile memory. Close the hood.

As with the Astra-G, the fuel tank on the Astra-H is made of plastic and has a filling volume of 52 l. The fuel tank is equipped with two locking straps for fastening. These brackets are fastened with bolts at the four points under the floor of the car. To protect the fuel tank from a high temperature of the exhaust system attached to a fuel tank heat shield.

Fig. 2.289. The design of the fuel

tank (installed): 1 - the parking brake cable bracket system, 2 mount - fixing bracket of the fuel tank, 3 - fuel tank, 4 - heat shield, 5 make-fitting - fuel line