9 minute read
Automatic mode electronic climate control
Fig. 1.126. Side nozzle blowing
Additional nozzles are located under the windshield and side windows, as well as the front in the lower area near the floor.
Heated front seats
Fig. 1.127. Keys include heating
front seats
Depending on the desired degree of heating press for the inclusion of the seat once or several times. Indication of the inclusion of one of the three steps is carried out an alarm indicating a key.
NOTE People with sensitive skin do not recommend prolonged use of heating at the highest level.
In order to turn off the heating, press. If the alarm goes off in the key, then heating is turned off.
NOTE Seat heating is carried out only with the engine running.
This mode performs automatic compensation of temperature changes due to external influences such as sunlight. The indication is realized on the information display. Changes in individual parameters briefly displayed on the information display. Thus the currently displayed menu overlaps indication parameter. Depending on the model of the display image may be different. When locking the car using the remote control device settings climate control system are stored in memory for the corresponding remote control device. It is possible to set the phone manually via the menu on the display. When the cooling (air conditioning compressor) is cooling and drying. Micro-filter cleans the air entering the outside air from dust and soot, as well as pollen and spores.
Automatic air circulation system
Automatic air circulation system with air quality sensor registers the presence of harmful gases surrounding and automatically switches to a mode of circulation. In automatic mode, climate control maintains optimal parameters in almost any conditions. If necessary, climate-control settings can be configured manually. Features climate control fully available only when the engine is running. At low ambient temperatures cooling (air conditioning compressor) switches off automatically.
Automatic mode
Fig. 1.128. Enable automatic mode
To enable automatic climate-control mode, press «AUTO», open all the blowing nozzle, turn the air conditioner compressor, and then left the set temperature control at 22 ° C (Fig. 1.128). If necessary, you can set the temperature above or below. If you turn off air conditioning compressor (the display shows the ECO) may reduce the level of comfort and security. All nozzles blowing in the automatic mode, adjust automatically, so they must be kept open.
Automatic mode of air circulation
The ventilation system switches to circulation vozduhapri which the air in the cabin is mixed. Automatic air circulation system with air quality sensor registers the presence of harmful gases surrounding and automatically switches to a mode of circulation. At low outdoor temperature and off cooling (air conditioning compressors) the possibility of the automatic mode, the air circulation is limited. Thus avoid fogging of glasses. If necessary, activate the circulation of air manually.
Temperature
The temperature value is set left-regulator within 16-28 ° C. To ensure comfortable conditions for the temperature should be changed gradually. The vehicles with the system of rapid heating salon «Quickheat» is an additional electric heater. When you install the temperature below 16 ° C, the display shows Lo. In this case, climate control is working continuously with maximum cooling without temperature control. When setting the temperature above 28 ° C, the display shows Hi. In this case, climate control is working continuously with maximum power heating with no temperature control. Installations temperature after ignition is turned off are recorded in the memory.
Manual Installation
In special circumstances (such as icing or sweating glasses) climate-control settings can be configured manually. Climate-control settings can be changed through secondary rotary knob, buttons and menus displayed on the display. To access the menu, press the middle knob. The display shows the menu for manual settings climate control.
Some menu items are indicated by turning the middle knob and select it by pressing. When you choose some other menu items appear, if the menu was selected by pressing.
To close the menu, turn the middle knob to the left or right to position «Return» or «Main» and confirm the selection.
Fig. 1.130. Power-Off "manual"
control mode
Performed manually install after the ignition is turned off are recorded in the memory.
Removal of moisture and frost from the glass
Fig. 1.131. Shutting down the
regime remove moisture and frost from the glass
Press activate the removal of moisture and frost from the glass. The display shows the appropriate symbol and the key will light signaling (Fig. 1.131). 62
Temperature and air distribution are installed automatically, airflow is over-capacity, and the glass quickly freed from frost and moisture. Air flow rate can increase or decrease the rotation of the right of the regulator. To return to automatic mode again, press mode or press «AUTO».
Switching the air conditioning compressors
Fig. 1.132. Mode on and off air
conditioning compressors
If the cooling or dehumidification is not necessary, turn off air conditioning compressor (the greatest fuel economy). To do this, click Manual Setup settings, scroll to the AU and press select it. The display ECO.
This cooling and removing moisture from the incoming air is not produced, thus limited comfort provided by electronic climate control system. This could lead, for example, sweat glasses. To enable cooling mode, the manual settings menu, select the item and pressing a switch on AC cooling.
Mode of air distribution
Fig. 1.133. Vlyuchenie mode of air
distribution
Turn middle knob, the display will cycle to show the settings of air distribution. The distribution of air can also be controlled using the menu «Air distribut».
Top: the distribution of air to the windshield and front side window In the middle: the distribution of air to the passengers through the adjustable nozzle blowing in the front. Down: distribution of air into the lower space of the passenger compartment. To return to the automatic shut-down the air distribution settings, or press «AUTO».
Turn the right knob left or right. Chosen level of airflow is shown on the display after the number of the icon (see Figure 1.134). At stage 0 ventilation and cooling (air conditioning compressor) are switched off. To return to automatic mode, press «AUTO».
Adjusting characteristics of airflow in the automatic mode
Parameters adjustment of airflow in the automatic mode can be changed manually.
Fig. 1.135. Setting the tuning
characteristics
In the manual settings menu choose the option «Autom blower» and then adjusting the desired characteristic (Fig. 1.135). In accordance with the established value increases the maximum air flow - and with it the noise level.
Enabling and disabling the automatic mode, the air circulation
Automatic air circulation system with air quality sensor registers the presence of harmful gases surrounding and automatically switches to a mode of circulation.
Fig. 1.136. Selecting the automatic
air circulation
In the manual settings menu choose the option «Auto, recirc» and pressing the knob turn on or off mode (Fig. 1.136). If necessary, turn the manual mode of air circulation.
Manual air circulation
Air circulation system prevents the infiltration of outside air in the cabin, while the internal air is pumped salon. Press, then on it will light detector. When the air circulation of air exchange is limited. Air quality inside the cabin eventually deteriorates. In the operating mode without cooling air humidity increases, so may fogging glasses. Manual air circulation includes only a short time. To turn off the manual mode of air circulation to re-press, a key indicator turns off.
Air conditioning with engine off
When parked the car and the ignition is turned off, you can use more available in the heat or, respectively, cold air conditioning in the cabin, for example at a stop in front of the railway crossing.
Fig. 1.137. Air conditioning mode
when engine off
To do this, press «AUTO» when ignition is turned off, the phone briefly displays the inscription «Residual air conditioning on».
NOTE Length air conditioning in the engine off is limited.
To turn off the mode again press «AUTO».
Cooling of the front glove compartment
The cooled air flows through the nozzle in the front kit box.
Fig. 1.138. Enabling and disabling
airflow to the front glove compartment
If the need for cooling the front glove compartment is not, move the nozzle forward (Fig. 1.138).
Air intakes are located in the engine compartment from the outside in front of the windshield (see Figure 1.139). They should be free for the flow of air, if necessary, remove the leaves from the air intake grilles, mud or snow.
Deflates
When placing items in the trunk does not block any openings for air outlet located on the right and left on the back wall.
Air microfilter
Micro-filter cleans the air entering the outside air from dust and soot, as well as pollen and spores. A layer of activated carbon to remove the air from extraneous odors and harmful gases. Air microfilter should be replaced at intervals specified in the service book.
Instructions for maintenance of air conditioning and heating
If wet weather mist over the windshield, you should briefly turn the system airflow to the windshield. The most efficient air conditioner works when the windows and sliding sunroof are closed. A strong heating of the passenger compartment after prolonged exposure to sunlight for a short time, open the windows and sliding sunroof to ensure the rapid removal of heated air.
NOTICE When the air-conditioning (cooling compressor) is formed condensation water flowing at the bottom of the car. When the air conditioning unit (cooling compressor) should be open at least one outlet air to the evaporator is not covered with frost due to insufficient air flow.
Maintenance System
To ensure stable operation, the compressor air conditioner should be regardless of the weather and time of year once a month to include a few minutes. If in-vehicle climate control is done automatically during the ride.
