Vapor Fuel System

NOTE трежьте по пунктирной линии острым ножом.

2 Remove the vent hose from the bracket and disconnect them from the filler neck. in 4 locations. Disconnect the hose from the fuel pipe fuel filler. Loosen the clamp attachment.

Setting

Attach the hose to the fuel pipe fuel filler. Fasten the clamp moment 3,5 Nm Attach the vent pipe to pipe fuel filler. Connect the vent pipe. Attach the fuel water separator. 2 Connect the vent hose. 2 Remove the vent hose from the bracket. Attach to the filler pipe in 4 locations. 3 Install cable ties. Install the fuel tank with a pipe fuel filler. Attach the 2 clamp mounting the fuel tank. Tighten the 4 bolts fastening moment 20 Nm Raise the jack. Attach the tube to the fuel water separator fuel filler and tighten the attachment bolt. Attach the pipe fuel filler, tighten the bolt and fasten the clamp. Set the parking brake cable system in the bracket. 2 Connect the fuel line. 2 quick-connect couplings. Connect the wiring harness connector module in the tank. Install the front exhaust pipe from the front muffler. Attach the front exhaust pipe from the front muffler to catalytic converter, tighten the moment 20 Nm Install a new gasket. Tighten the 3 new nuts moment 20 Nm Connect the wiring harness of oxygen sensor (control of the catalytic converter). Install rear silencer. Attach a silencer to the front of the rear exhaust. Fasten the rear silencer and tighten the clamp fixing point 18 Nm Lower the car in half. Install lining the rear right wheel arch. Install the right rear wheel. Lower the car in half. Tighten the right rear wheel. Attach the pipe fuel filler. Remove the cap fuel filler. Install a rubber membrane. Attach the plug fuel filler. Close the hatches of the fuel tank filler cap. Connect the battery pack. Connect the clip weight to the conclusion that mass. Program volatile memory. Close the hood.

Fuel vapor recovery system prevents the formation of fuel vapors from the fuel tank into the environment. Couples going into a container filled with activated charcoal. These fuel vapors are involved in the process of combustion under certain operating conditions of the engine. According to the construction and function of this system is the appropriate model system, Astra-G.