Replacing the radiator (2.0 liter engines

Withdrawal

Open the hood. Disconnect the battery. Disconnect the connection with the mass of the output mass. Remove the grille, disconnect the 4 rivets. Disconnect from the front facing the top. Disconnect 5 times. Attach the radiator to the upper bracket. Raise the car in half. 5 Remove the rivets. Disconnect 4 times and remove the front bumper. Raise the car in half. Place the bottom of the container for drainage. Drain the coolant.

Fig. 2.254. Wiring harness

connector from the fan case fan: 1 connector

Disconnect the wiring harness from the fan case fan (Fig. 2.254). Undock the cable clip. Remove the right bracket of the radiator, otvernuy 2 bolts fastening. Fig. 2.255. Radiator brackets: 1 -

right 2 - left

Remove the left arm of the radiator, otvernuy 2 bolts fastening (Fig. 2.255). Lower the car completely.

Fig. 2.256. Removing the boost

pressure sensor: 1 - boost pressure sensor, 2, 3 - clamps

Remove the boost pressure sensor, remove the attachment bolt (Fig. 2.256). Disconnect the hose from the boost air intercooler. Disconnect relapsing turbocharger coolant hose from the radiator. Disconnect the bracket.

Fig. 2.257. Mounting the cooler air

pressurization: 1 - attachment bolt, 2 - nuts

Unplug the cooler air from the boost capacitor, unscrewing the nut and bolt attachment (Fig. 2.257).

NOTE Module coolant is shown removed for clarity.

Tilt intercooler forward in the lower bracket. Disconnect the fan from the radiator by unscrewing 2 screws fastening. Fig. 2.258. Mounting the fan: 1 -

bolts fastening

Remove the fan with a car in the direction of the arrows in Figure 2.258.

Fig. 2.259. Upper radiator hose: 1 -

hose

Disconnect the upper hose from the radiator by removing the clamp (Fig. 2.259).

Disconnect the lower hose from the radiator by removing the clamp (Fig. 2.260). Raise the car in half.

Fig. 2.261. Wiring harness

conditioner: 1 - clamp

Disconnect the wiring harness from the air conditioner radiator, removing the cable clamp (see Figure 2.261).

Fig. 2.262. Hose Air Pressurization: 1 - hose

Disconnect the hose from the radiator air pressurization (Fig. 2.262).

Fig. 2.263. Mounting the

condenser: 1 - bolts fastening