Replace the spark plug threads in the cylinder number 2. Give compressed air into the cylinder number 2. Replace valve stem seals, cylinder number 2. Relocate adapter supply of compressed air. Shut off the supply line of compressed air. Unscrew the adapter from the spark plug threads, cylinder number 2. Replace the spark plug threads in the cylinder number 3. Give compressed air into the cylinder number 3. Replace valve stem seals, cylinder number 3. Shut off the supply line of compressed air. Detach lever valve springs. Remove the adapter compressed air. Loosen the crankshaft. Set the gearshift lever to neutral position. Turn off the parking brake systems. Raise the car. Lock the crankshaft. Pull the chain drive mechanism for timing up. Evenly, rotate the crankshaft until it stops a special device KM 952. Install special tool KM-952. Lower car Setting Replace spark plug with a special device KM-194-E and tighten the moment 25 Nm Visually check the elements - camshafts, camshaft bearing cap, cylinder head, valve tappets, hydraulic valve tappets. Install hydraulic lifters and tappets.
Removing and installing the crankshaft (engine 1.4 liters) Withdrawal Remove the engine. Remove the manual transmission. Install the engine in a special fixture KM 412. Lift the engine. Set a special device KM-412-18 (1) on the engine. Tighten the 4 bolts fastening. Fig. 2.176. The engine installation on a special stocks: 1 - head, 2 biscuits
Secure the motor in the KM 412 (Fig. 2.176). 8 Tighten the mounting bolts. Remove the restraining ropes KM-2358.
228
