Attach special tool KM 6624 on the O-ring (Fig. 2.166). Tighten the bolt. Attach special tool KM-328-B of the CM 6624. Remove the O-ring with the help of special instruments KM-328-B, and KM 6624 (Fig. 2.166). Setting Fig. 2.167. Remains of seal
Remove the remnants of a sealant compound cylinder with oil pan (the arrows in Figure 2.167). Install new O-ring Slide the O-ring on the crankshaft. Slide to a complete and uniform planting in the engine block. NOTE No O-ring is pressed fully.
Fig. 2.168. Installation omentum: 1 - a special tool KM 6623; 2 - fixing screws, 2 - screw fixing
Install the O-ring with a special tool KM 6623 (Fig. 2.168). Tighten the 3 screws for fixation. Fully zapressuyte O-ring. Tighten the attachment bolt. Remove the special tool KM 6623 Loosen the 3 screws for fixation. Install the flywheel.
Replacing the valve stems seals (installed cylinder head) Withdrawal Remove the camshafts. Remove the spark plug with a special tool KM-194-E. Raise the car. Remove the right engine splash guard.
223
