Model 2500RT Engine Removal/Installation 43. On early machines, remove air intake tube bracket mounting screw (B, Fig. 251).
46. Remove battery ground cable screw (D, Fig. 253).
NOTE: Later machines have a diffrent intake hose without bracket and clamp shown in Fig. 251. D
B
Fig. 253 – Remove Battery Ground Cable
Fig. 251 – Remove Air Intake Tube Mounting Screw
IMPORTANT: Label all electrical connectors (R, Fig. 254) and note their locations to ensure correct installation.
44. Disconnect the air intake tube. Cover the opening on the turbocharger to prevent debris from entering the turbocharger.
47. Unplug electrical connections (R) and set wire harness/connectors to the side to prevent them from getting damaged.
45. Disconnect the glow plug ground cable (C, Fig. 252). S
R R
C
S
Fig. 254 – Hydraulic Pump Electrical Connections (Early Machines Shown; Later Machines Similar)
Fig. 252 – Disconnect Glow Plug Ground Cable
48. Remove fasteners (S) securing the hydraulic pump to the engine. Discard 1/2” capscrews, but retain washers for installation.
Printed in U.S.A.
189
50940165/C0718
