1 minute read
Model 2500RT Engine Removal/Installation
13.Remove locknut (J, Fig. 227), screw (K), and 2 washers (L) from the upper door mount.
16.Lift the engine compartment access door just high enough for pins (P, Fig. 229) to clear the brackets (Q), and remove the door.
Caution
The door is heavy. A hoist or other similar lifting device is recommended when removing the door.
IMPORTANT: There is a fiber washer (R, Fig. 230) located between the door and frame brackets.
14.Remove locknut (M, Fig. 228), screw (N), and 2 washers (O) from the lower door mount.
15.Lift latch pin (Z) and close, but do not latch, the engine compartment access door (I).
17.Remove fiber washer (R, Fig. 230) from the upper and lower door mounting brackets (Q).
