Models 1750RT/2100RT Tier 4 Engine Removal/Installation

31.Lower the ROPS/FOPS according to “Lower ROPS/FOPS” on page142.

32.If the machine is equipped with air conditioning: a.Discharge and recover air conditioning refrigerant. a.Disconnect the condenser fan connector (B, Fig. 327) from the main harness connector. b.Disconnect air conditioning supply (C, Fig. 328) and return (D) lines from the condenser.

33.Support engine compartment cover (A, Fig. 329) using an appropriate lifting device.

34.On both sides of the engine compartment cover: a.Remove nut (B) securing support strut (C), and disconnect support strut from engine compartment cover (A). b.Remove spring clip (D) and pin (E), and remove engine compartment cover (A).

NOTE: Label all electrical connectors and note their locations to ensure correct installation.

NOTE: Cap and plug lines to prevent contamination.