Lift Arm and ROPS/FOPS b. Connect right-side (high-flow) auxiliary hydraulic hoses (H and I, Fig. 188).
6. For both lift cylinders: a. Raise lift cylinder (M, Fig. 190), align the rod end of the cylinder with the pivot pin opening, and install pivot pin (N).
O I N H
M
Fig. 190 – Connect Lift Cylinder to Lift Arm (Early serial numbers shown; later machines similar)
Fig. 188 – Connect Right Side Auxiliary Hydraulic Hoses
4. Connect left-side auxiliary hydraulic hoses (J and K, Fig. 189).
P
b. Install screw (O) and locknut (P). 7. Check the hydraulic system oil level according to “Checking Hydraulic Oil Level” on page 131. Add oil if necessary. Refer to “Fluids/Lubricants Types and Capacities” on page 37 for proper hydraulic oil specifications. 8. Reconnect the negative cable to the battery.
J L K
Fig. 189 – Connect Left Side Auxiliary Hydraulic Hoses
5. Connect left side auxiliary return line (L)
50940165/C0718
166
Printed in U.S.A.
