Golf 2015 ➤ , Golf Variant 2015 ➤ Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015 – Apply the sealant on the clean sealing surface of the cylinder head cover as illustrated -arrows-. ♦ Sealant bead thickness: 2 to 3 mm. – Secure the camshaft and place the cylinder head cover with the camshaft on the cylinder head.
– Lightly push on the cylinder head cover by hand and while doing this turn the camshaft slightly until the cylinder head cover lays free of tension on the cylinder head. – Replace the cylinder head cover bolts.
ed ris o h t au ss
ran tee or ac ility ab y li an pt ce
Note
un le
– Tighten the bolts in several steps, tightening sequence. Refer to . Volkswagen AG does ⇒ Fig. ““Cylinder Head Cover Tightening Sequence”“ ,kswagen AG not l o V page 135 . gu y b a
– Turn the intake camshaft with the Adapter - T40266- in the direction of the -arrow A- until the markings -1 and 2- align. Push the Camshaft Lock - Component 2 - T40271/2- in the chain sprocket splines in direction of -arrow B-.
r fo ng
ht rig py Co t.
– Turn the exhaust camshaft with the Adapter - T40266- in the direction of -arrow A- until the markings -1 and 2- align. Push the Camshaft Lock - Component 1 - T40271/1- in the chain sprocket splines -B-. The mark -2- is offset slightly to the right.
rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um en
urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d p
Pay attention that the cylinder head cover is not tilted.
4. Valvetrain
155
agen lksw Vo by
AG.
Prote cted by
c o p yri gh t. C op yi