3 minute read
4.8 Oil Pressure Regulation Valve N428 , Removing and Installing
Golf 2015 ➤ , Golf Variant 2015 ➤ Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015
4.2 Overview - Oil Pressure Switch/Oil Pressure Regulator Valve
1 - Bolt ❑ 4 Nm + 90° turn ❑ Replace after removing 2 - Oil Pressure Regulation Valve - N428❑ Checking. Refer to Ve‐hicle Diagnostic Tester ❑ Removing and instal‐ling. Refer to ⇒ “4.8 Oil Pressure Regulation Valve N428 , Removing and Instal‐ling”, page 206 . 3 - O-Ring Protected by copyright . Copying fo pivate or commerci al pur po s e s , i n p a r t r o r in w ho le, is not permitted unless authorised by Volkswagen AG. Volkswagen AG does notguarantee or accept any liabilit y wi th res pect t o t h e c o r r e c t n e ss o f in format ion in this document. Copyright by Volkswagen AG. r ❑ Replace after removing ❑ Coat with engine oil 4 - O-Rings ❑ Replace after removing ❑ Coat with engine oil 5 - Bolt ❑ 4 Nm + 45° turn ❑ Replace after removing 6 - Piston Cooling Nozzle Con‐trol Valve - N522❑ Checking. Refer to Ve‐hicle Diagnostic Tester ❑ Removing and instal‐ling. Refer to ⇒ “4.7 Piston Cooling Nozzle Control Valve N522 , Removing and Installing”, page 205 . 7 - Seal ❑ Replace oil pressure switch after each time it is loosened 8 - Oil Pressure Switch - F1❑ 20 Nm ❑ Blue or gray insulation ❑ Checking. Refer to Vehicle Diagnostic Tester ❑ Removing and installing. Refer to ⇒ “4.3 Oil Pressure Switch F1 , Removing and Installing”, page 199 . 9 - Reduced Oil Pressure Switch - F378❑ 20 Nm ❑ Brown insulation ❑ Checking. Refer to Vehicle Diagnostic Tester ❑ Removing and installing. Refer to ⇒ “4.4 Reduced Oil Pressure Switch F378 , Removing and Installing”, page 200 . 10 - Seal ❑ Replace oil pressure switch after each time it is loosened 11 - Seal ❑ Replace oil pressure switch after each time it is loosened
Golf 2015 ➤ , Golf Variant 2015 ➤ Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015
12 - Oil Pressure Switch, Level 3 - F447❑ 20 Nm ❑ Checking. Refer to Vehicle Diagnostic Tester ❑ Removing and installing. Refer to ⇒ “4.5 Oil Pressure Switch, Level 3 F447 , Removing and Installing”, page 201 . ❑ Installed position. Refer to ⇒ Fig. ““ Oil Pressure Switch, Level 3 -F447- Installed Position”“ , page 199
Oil Pressure Switch, Level 3 - F447- Installed Position
Special tools and workshop equipment required ♦ Socket and Jointed Extension - 24mm - T40175-
Caution
Protected by copyright . Copying for pivate or comm rci al pur po e s , i n p a r t r o r in w ho le, is not permitted unless authorised by Volkswagen AG. Volkswagen AG does notguarantee or accept any liabilit y wi th res pect t o t h e c o r r e c t n e ss o f in format ion in this document. Copyright by Volkswagen AG. This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure. Mandatory Replacement Parts ♦ Seal - Oil Pressure Switch Removing Note s ♦ Place a cloth under the accessory assembly bracket to collect leaking engine oil. ♦ Replace the seal after each time the oil pressure switch is loosened. e– Disconnect the connector -arrow- from the Oil Pressure Switch - F1- .
