Removing and Installing

Golf 2015 ➤ , Golf Variant 2015 ➤ Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015

– Remove the bolts -1- and remove the glide rail -2-. – Remove the camshaft timing chain from the camshaft bearing and guide downward.

Protected by copyright . Copying for pivate or co merci al pur po s e s , i n p a r t r o r in w ho le, is not permitted unless authorised by Volkswagen AG. Volkswagen AG does notguarantee or accept any liabilit y wi th res pect t o t h e c o r r e c t n e ss o f in format ion in this document. Copyright by Volkswagen AG. – Install the Assembly Tool - Turning Over Tool - T10531/3- . In the “TDC point” the flat area -1- points upward. Install the As‐sembly Tool - Knurled Nut - T10531/4- . Turn the crankshaft with a 32 mm open end wrench counter-clockwise out of “TDC”. m – Turn the intake camshaft in the direction of the -arrow 1- using the Adapter - T40266- . Slide the Camshaft Lock - T40271/2-2- out of the chain sprocket splines and bring the camshaft into the rest position.

– Turn the exhaust camshaft in the direction of the -arrow 1- us‐ing the Adapter - T40266- . Slide the Camshaft Lock -

T40271/1- -2- out of the chain sprocket splines and bring the camshaft into the rest position. – Remove the cylinder head cover bolts -1 to 6- in sequence. – Remove the cylinder head cover.