1.2 High Fuel Pressure, Reducing

Golf 2015 ➤ , Golf Variant 2015 ➤ Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015

Oxygen Sensor Heater - Z19❑ Component location. Refer to ⇒ Fig. ““ Oxygen Sensor 1 before Catalytic Converter -GX10- -1- ”“ , page 283 . ❑ Removing and installing. Refer to ⇒ “8.2 Oxygen Sensor 1 before Catalytic Converter GX10 , Removing and Installing”, page 333 . 6 - Turbocharger Recirculation Valve - N249- and Charge Pressure Actuator - V465❑ Components are installed directly on the turbocharger ❑ Component location. Refer to ⇒ “1.1 Overview - Turbocharger”, page 256 . ❑ Removing and installing. Refer to ⇒ “1.1 Overview - Turbocharger”, page 256 . 7 - Camshaft Position Sensor 3 - G300❑ 9 Nm ❑ Component location. Refer to ⇒ Fig. ““Ignition Coils and Adjusting Elements”“ , page 280 . ❑ Removing and installing. Refer to ⇒ “1.5.2 Camshaft Position Sensor 3 G300 , Removing and Installing”, page 360 . 8 - Brake Lamp Switch - F- and Brake Pedal Switch - F47❑ Component location. Refer to ⇒ Fig. ““Installed Location of the Brake Lamp Switch -F- / Brake Pedal Switch -F63- and Vacuum Sensor -G608- .”“ , page 279 . Protected by copyright . Copying fo pivate or commerci al pur po s e s , i n p a r t r o r in w ho le, is not permitted unless authorised by Volkswagen AG. Volkswagen AG does notguarantee or accept any liabilit y wi th res pect t o t h e c o r r e c t n e ss o f in format ion in this document. Copyright by Volkswagen AG. r ❑ Removing and installing. Refer to ⇒ Brake System; Rep. Gr. 45 ; Component Location Overview . 9 - Connectors ❑ For Oxygen Sensor 1 before Catalytic Converter - GX10❑ For Oxygen Sensor 1 after Catalytic Converter - GX7❑ Component location. Refer to ⇒ Fig. ““Oxygen Sensors”“ , page 283 . 10 - High Pressure Pump with Fuel Pressure Regulator Valve - N276❑ Component location. Refer to ⇒ Fig. ““High Pressure Pump and Camshaft Position Sensor”“ , page 282 . ❑ High Pressure Pump Assembly Overview. Refer to ⇒ “7.1 Overview - High Pressure Pump”, page 325 . ❑ Removing and installing. Refer to ⇒ “7.2 High Pressure Pump, Removing and Installing”, page 328 . 11 - Engine Coolant Temperature Sensor - G62❑ Component location. Refer to ⇒ “2.3 Overview - Engine Coolant Temperature Sensor”, page 228 . ❑ Removing and installing. Refer to ⇒ “2.10 Engine Coolant Temperature Sensor G62 , Removing and Installing”, page 238 . 12 - Engine Control Module - J623❑ Removing and installing. Refer to ⇒ “6.1 Engine Control Module J623 , Removing and Installing”, page 321 . 13 - Camshaft Position Sensor - G40❑ 9 Nm ❑ Component location. Refer to ⇒ Fig. ““View from Above”“ , page 281 . ❑ Removing and installing. Refer to ⇒ “1.5.1 Camshaft Position Sensor G40 , Removing and Installing”, page 360 . 14 - Channel Separating Plate Vacuum Diaphragm (Intake Manifold Flaps) ❑ Component location. Refer to ⇒ Fig. ““Variable Intake Manifold”“ , page 281 . 15 - Connector for the Intake Manifold-Fuel Injector 16 - Intake Manifold Runner Control Valve - N316❑ Component location. Refer to ⇒ Fig. ““Variable Intake Manifold”“ , page 281 .

Golf 2015 ➤ , Golf Variant 2015 ➤ Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015 Protected by copyright . Copying fo pivate or commerci al pur po s e s , i n p a r t r o r in w ho le, is not permitted unless authorised by Volkswagen AG. Volkswagen AG does notguarantee or accept any liabilit y wi th res pect t o t h e c o r r e c t n e ss o f in format ion in this document. Copyright by Volkswagen AG. r 17 - Engine Speed Sensor - G28❑ 4 Nm + 45° ❑ Component location. Refer to ⇒ Fig. ““ Engine Speed Sensor -G28- -1- ”“ , page 282 . ❑ Coat the seal with oil ❑ Replace screw after removal ❑ Removing and installing. Refer to ⇒ “1.6 Engine Speed Sensor G28 , Removing and Installing”, page 361 . 18 - Connectors for ❑ Knock Sensor 1 - G61❑ Intake Manifold Runner Control Valve - N316❑ Fuel Pressure Sensor - G247❑ Intake Manifold Runner Position Sensor - G336❑ Camshaft Position Sensor - G40❑ Combustion chambers fuel injectors N30 to N33 ❑ Component location. Refer to ⇒ Fig. ““Connectors”“ , page 282 . 19 - Low Fuel Pressure Sensor - G410❑ 15 Nm ❑ Install the Low Fuel Pressure Sensor - G410- with an adapter ❑ Component location. Refer to ⇒ Fig. ““View from Above”“ , page 281 . ❑ Removing and installing. Refer to ⇒ “5.4 Low Fuel Pressure Sensor G410 , Removing and Installing”, page 318 . 20 - Knock Sensor 1 - G61❑ 20 Nm ❑ In order to remove, the coolant pump and coolant thermostat must be removed ❑ Removing and installing. Refer to ⇒ “1.4 Knock Sensor 1 G61 , Removing and Installing”, page 359 . 21 - Intake Manifold Sensor - GX9❑ Consists of:

Intake Air Temperature Sensor - G42-

Manifold Absolute Pressure Sensor - G71-

❑ Component location. Refer to ⇒ Fig. ““View from Above”“ , page 281 . 22 - Throttle Valve Control Module - GX3❑ Consists of:

EPC Throttle Drive - G186-

EPC Throttle Drive Angle Sensor 1 - G187-