4.3 Camshaft Adjustment Valve 1 N205 , Removing and Installing

Golf 2015 ➤ , Golf Variant 2015 ➤ Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015

– Bolt the Camshaft Lock - Component 2 - T40271/2- to the cyl‐inder head and slide into the splines on the chain sprocket in the direction of -arrow 2-. Rotate the intake camshaft with the

Adapter - T40266- -1- if necessary. – Install the Camshaft Lock - Component 1 - T40271/1- on the cylinder head. For the following steps a second technician is necessity. – Hold the exhaust camshaft with the Adapter - T40266- in the direction of -arrow A-. Remove the bolt -1- and guide the ten‐sioning rail -2- downward. Turn the camshaft further in a clockwise direction -arrow A- until the Camshaft Lock - Com‐ponent 1 - T40271/1- can be slid into the chain sprocket splines in direction of -arrow B-.

– Check the installation position -arrow C- of the Camshaft Lock - Component 1 - T40271/1- .

Protected by copyright . Copying for pivate or commerci al p r po s e s , i n p a r t r o r in w ho le, is not permitted unless authorised by Volkswagen AG. Volkswagen AG does notguarantee or accept any liabilit y wi th res pect t o t h e c o r r e c t n e ss o f in format ion in this document. Copyright by Volkswagen AG. – Remove the guide rail -1- by unlocking the latch -arrow- with a screwdriver and pushing the guide rail forward. u – Press the oil pump chain tensioner bracket in direction of -arrow- and lock with Locking Pin (3 pc.) - T40011- . – Remove the bolt -1- and remove the chain tensioner.