Arona 2018 ➤ , Ateca 2017 ➤ , Ibiza 2016 ➤ , Ibiza 2018 ➤ , Ibiza ST ... 3-cylinder petrol engine (1.0 l direct injection, 4 V, turbocharger, EA211) - Edition 07.2018 ♦ Hot air blower - VAS 1978/14A- -item 1- with nozzle -2- from wiring harness repair set - VAS 1978 B-
♦ Small grinder (commercially available) ♦ Vehicle diagnostic tester Removing Note ♦ If the engine control unit - J623- needs to be renewed, connect
⇒ Vehicle diagnostic tester and perform “Guided functions, Renewing engine control unit”.
♦ If renewed, the engine control unit - J623- must be adapted to
the electronic immobilizer ⇒ Vehicle diagnostic tester “Guided functions”. Note
The protective housing is secured with shear-head bolts. The shear-head bolts cannot be removed without being damaged. Use e.g.Protected the axial grinder - VAS 6682- or a commercially available by copyright. Copying for private or commercial purposes, in part or in whole, is not angle grinder to remove shear-head the protective permitted unless authorisedthe by SEAT S.A. SEAT S.Abolts. does notIfguarantee or accept any liability with respect to the correctness of information in this document. Copyright by SEAT S.A. housing is damaged, it must be renewed. – Switch off ignition and remove key from ignition lock. Note ♦ If the engine (motor) control unit comes into contact with the
positive battery terminal, permanent damage to the engine (motor) control unit will be the consequence.
♦ Therefore, disconnect the battery before removing the engine
control unit ⇒ Electrical system; Rep. gr. 27 ; Battery; Dis‐ connecting and connecting battery .
416
Rep. gr.24 - Mixture preparation - injection
