Section 7. Component Procedures
Toyota Orderpicker Model 7BPUE15 Service Manual Electrical Components
Steer Motor
Steer Motor
9. Install new steer motor assembly on pivot ring. Secure with four bolts and adhesive (P/N 00590-04964-71). See Figure 7-6 1.
Inspection Check brushes. Once brushes are removed, check commutator. See Figure 7-60.
Figure 7 -6 1 .
Steer Motor Mounting
10. Install steer switches. Figure 7 -6 0 .
Steer Motor Commutator, Brushes Removed
Replace 1. Turn key switch OFF and disconnect battery.
11. Connect M+ and M- to steer/tractor manager. 12. Install circuit card cover. 13. Connect power and test operation before returning truck to service.
2. Remove tractor covers. See "Tractor Covers" on page 7- 1 1.
3. Remove circuit card cover. 4. Disconnect wires M+ and M- from steer/tractor manager.
5. Remove proximity switches and disconnect encoder. 6. Remove four mounting bolts and pull steer motor assembly off pivot ring. See Figure 7-61. 7. Remove six mounting bolts that secure motor to mounting
Figure 7-62.
8. Install mounting plate to steer motor using six bolts.
Disassembly
Separating Steer Motor from Gear Box
1. Remove steer motor. See "Steer Motor" on page 7-42. 2. Remove eight screws in the gear box. See Figure 7-62.
3. Replace parts a s necessary. See Figure 7-63.
00700-CL222-05, 1 5 March 2005
