15 Maintenance
15 Maintenance 15.2 Maintenance schedule
15.2 Maintenance schedule Maintenance work
daily
●
●
10
100
operating hours
every 50
100
250
operating hours
annually = every 500 oper. hours
before harvest
after the first
as necessary
Maintenance intervals
Gear drives: – Check all gear drives for leaks Rotor drive, page 149: – Check level of low-viscosity grease, and fill up if necessary
●
●
●
●
●
●
Angle drives, page 155: – Check oil level
●
– Oil change
●
Brakes, page 161 – Vent the compressed air tank
●
– Clean the element of pneumatic air filter
●
– Check stroke of brake cylinder, and adjust, if necessary
●
● ● ●
●
– Check operation of the brake system
●
●
– Visual check of the brake system
●
●
Tyres, page 172 – Check tightness of wheel nuts and bolts, and retighten, if necessary
●
●
●
●
●
– Check/correct the tyre pressures Adjustment work, page 164 – Check/re-tension the flotation springs
●
●
●
– Check/re-tension rotor flotation springs
●
●
●
– Check/adjust the reed switches
●
●
– Check/adjust the speed sensor.
●
●
– Check/adjust the angle encoders.
●
●
– Check/adjust the speed sensor.
●
● ●
– Checking the track Hydraulics, page 173 – Check/replace the hydraulic hoses
●
– Replace filter element
●
●
●
●
●
●
●
●
Fixing elements, page 174 – Check tightness of all bolted joints, and retighten, if necessary
●
●
– Check tightness of tine fixing screws, and retighten, if necessary
●
●
– Check/replace all connecting elements
●
●
0293 133.7 - BA LINER 3000
●
147
