15.2. Maintenance schedule

15.2 Maintenance schedule

Maintenance work

Gear drives:

– Check all gear drives for leaks Rotor drive, page149: – Check level of low-viscosity grease, and fill up if necessary Angle drives, page155: – Check oil level

before harvest daily Maintenance intervals after the first every 10 100 50 100 250

operating hours operating hours annually = every 500 oper. hours as necessary

– Oil change ● ●

Brakes, page161 – Vent the compressed air tank ● ●

– Clean the element of pneumatic air filter ● ●

– Check stroke of brake cylinder, and adjust, if necessary – Check operation of the brake system – Visual check of the brake system Tyres, page172 – Check tightness of wheel nuts and bolts, and retighten, if necessary – Check/correct the tyre pressures Adjustment work, page164 – Check/re-tension the flotation springs ● ● ●

– Check/re-tension rotor flotation springs ● ● ● – Check/adjust the reed switches ● ● – Check/adjust the speed sensor. ● ● – Check/adjust the angle encoders. ● ● – Check/adjust the speed sensor. ● ● – Checking the track ● Hydraulics, page173 – Check/replace the hydraulic hoses ● ● ● – Replace filter element ● ● Fixing elements, page174 – Check tightness of all bolted joints, and retighten, if necessary ● ● ● ● – Check tightness of tine fixing screws, and retighten, if necessary ● ● ● – Check/replace all connecting elements ● ● ● ●