Clearance height at headland

1 12.2.3Clearance height at headland

Bring swather to the working position –see Working position with operating terminal, page62. Press these two keys simultaneously for about 3secs.

– The blinking frequency of the indicator light(1) changes from slow to fast. – The rotors are raised to the last setting made for the headland position. The raising height of the rotors can now be changed.

73696 13

14

73697 Press the following keys: Raise the front rotors.

Lower the front rotors.

Raise the rear rotors.

Lower the rear rotors.

When the required headland settings have been adjusted, they are stored by pressing this key. – All rotors are lowered. – The indicator light(1) stops blinking. (Fig.13,14,15,16)

15

Note!

The raising height of the rotors is limited to the maximum headland height here. The clearance height at the headland can only be programmed in pairs.

16