13 Field operation 13.1 Using the swather
13.1.1 Using the machine with ISOBUS Terminal Adjusting the working width (rotor overlap)
Swather with ISOBUS Terminal
The working width of the swather can be adjusted by means of the front rotors. If the working width is increased, the overlap between the front and rear rotors is reduced, and if the working width is reduced, the overlap is increased. Caution! Do not adjust to less than the minimum working width – see Minimum working width, page 125. 4
There are several screens in which the working width can be changed. Use the following soft keys: Soft key “Increase working width”. Soft key “Reduce working width”. Press the corresponding soft keys until the desired working width has been reached.
5
6
126
BA LINER 3000 - 0293 133.7
