12 Operation – Control terminal 12.4 Basic setting (initialisation)
12.4.1 Start initialization Danger! When raising/lowering the rotors, make sure that nobody is in the pivoting area. There is a risk of injury.
1
– Direct all persons out of the danger area. – Switch off the machine at once, if necessary.
STOP 73687
23
– If necessary, interrupt the control unit with the “STOP” key (1) (Fig. 23). Never work on the machine while the tractor's engine is running. – Switch off the engine. – Remove the ignition key.
Note! Do not press any keys during initialisation. This would interrupt the initialization procedure, which would have to be started again. Switch the control unit on – see Switching the control terminal on and off, page 101. (Fig. 23)
0293 133.7 - BA LINER 3000
117
