Claas Liner 3000 Operator's Manual - PDF DOWNLOAD

Page 10

4 Safety notes 4.1 Of special importance

4.1.1 Prop stand Danger! There is a risk of injury during all work on or under a raised machine. – Any work under the chocked up swather may only be carried out if the machine has been properly secured.

1

– Make sure that the machine is standing on firm ground. 1

– Only use suitable supports or chocks. – Lower the prop stand (1). The prop stand (1) may be used as a safety support. Attention! The prop stand (1) is designed only to support the machine's weight. If the load on the stand is increased e.g. by means of the tractor's hydraulic hitch, the stand could be damaged. – Do not place an extra load on the prop stand by means of the tractor's hydraulics. For details on operating the prop stand (1) – see Prop stand, page 33. (Fig. 1)

10

BA LINER 3000 - 0293 133.7


Turn static files into dynamic content formats.

Create a flipbook

Articles inside

Checking/adjusting the track

1min
pages 169-170

Universal drive shaft

1min
page 156

Assembling/dismantling the universal drive shaft protection

2min
pages 157-160

Angle drives

1min
page 155

15.2. Maintenance schedule

1min
page 147

swather with ISOBUS Terminal

1min
pages 143-144

15.3. Lubricants chart

1min
page 148

14.1. General faults

2min
pages 141-142

Using the machine with the control terminal

3min
pages 131-135

Height adjustment of rotors (rake height

1min
pages 137-138

Changing the swath width

1min
page 136

Using the machine with ISOBUS Terminal

4min
pages 126-130

12.6. Manual operation of hydraulic system

1min
pages 122-123

13.1. Using the swather

1min
pages 124-125

Start initialization

2min
pages 117-119

Initialization completed

1min
page 120

12.4. Basic setting (initialisation

1min
page 116

Raising/lowering the rotors

1min
page 114

Running gear

1min
page 113

11.5. Manual operation of hydraulic system

1min
pages 99-100

Indicator light

1min
page 103

Basic headland settings

1min
page 98

Activating manual control

1min
pages 111-112

Clearance height at headland

1min
pages 108-109

Starting the initialization process

1min
page 97

11.4. Basic setting (initialisation

1min
page 96

Running gear

1min
page 93

Activating manual control

2min
pages 91-92

Query of saved “Headland values”

1min
page 84

Menu bar

1min
page 76

Software management

1min
page 74

Switching on/off the CLAAS Communicator

1min
page 69

9.9. Unloading/loading the machine

1min
page 66

9.7. Working position with operating terminal

1min
pages 62-63

9.6. Working position with ISOBUS Terminal

2min
pages 59-61

9.5. Before lowering into the working position

1min
pages 57-58

Transport on public roads

2min
pages 47-49

9.2. Transport position with ISOBUS Terminal

2min
pages 50-52

Swing lighting bracket upwards

1min
page 56

9.3. Transport position with operating terminal

2min
pages 53-54

Connecting the hydraulics Opening the shut-off valve for the rear rotors

1min
page 34

8.1. Hitching the machine

1min
page 29

4.1. Of special importance

1min
page 9

Prop stand

1min
page 10

6.2. Hitching/adapting the swather

1min
page 24

Prop stand

1min
page 33

2.1. General information

1min
page 5

Adapting the hydraulics

1min
pages 26-27

7. Check every time before operation

1min
page 28
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.
Claas Liner 3000 Operator's Manual - PDF DOWNLOAD by www.heydownloads.com - Issuu