R69WA25A
REAR HSTAXLE
TRANSMI HST
Dealer Copy -- Not forSSION Resale
7. Insert the drive (1) into the case aligning its slotted end with the pin. Mark a line on top of the drive so that the assembly position of the drive is parallel to the port block mounting surface.
TRANSMISSION TRANSMI SSION
R69WA23A
CLUTCH
ENGINE
GENERAL
SAFETY FIRST
STEERING SYSTEM - DISASSEMBLY, SERVICE AND ASSEMBLY
R69WA24A
REAR BRAKE AXLE
5. With the unit case placed upside down, install a new O-ring (1) in the case groove, and lay the plate (2) on the unit with its wholes aligned.
HYDRAULIC STEERING SYSTEM
FRONT STEERING AXLE SYSTEM
FRONT BRAKE AXLE
S76W941A
S76W939A
DR72-W00
281 of 450
8. After fitting a new O-ring into the stator (1) slot and fitting the seal ring into the rotor (2), grease the surface, and install the stator and O-ring unit to the case and the rotor and seal ring unit to the cap respectively.
10-23
HYDRAULIC ELECTRIC & DIAGNOSIS SYSTEM
S76W968A
A/C AND INDEX HEATER
6. Position the spool and sleeve so that the pin is parallel with the port block mounting surface of the steering unit case.
