ENGINE
GENERAL
SAFETY FIRST
STEERING SYSTEM - DISASSEMBLY, SERVICE AND ASSEMBLY
unit should be tightened evenly to the specified torque.
Mounting bolts (M10P1.25)
TRANSMISSION TRANSMI SSION
Tightening torque......... 34.3 ~ 44.1 N•m 3.5 ~ 4.5 kgf-m 25.2 ~ 32.4 ft-lb
REAR HSTAXLE
TRANSMI HST
Tightening torque.........24.5 N•m 2.5 kgf-m 18.0 ft-lb
6. The mounting bolts (1) for the steering column and steering
Dealer Copy -- Not forSSION Resale
4. When installing the elbow (1) to each port of the steering unit, tighten them to the specified torque. Elbow (1)
CLUTCH
R69WA16A
R69WA14A
REAR BRAKE AXLE
1
FRONT BRAKE AXLE
R69WA15b
HYDRAULIC STEERING SYSTEM
A
Hydraulic hose R : Yellow tag....... 34.3 N•m 3.5 kgf-m 25.2 ft-lb
DR72-W00
277 of 450
HYDRAULIC ELECTRIC & DIAGNOSIS SYSTEM
• Hydraulic hose L : White tag........ 34.3 N•m 3.5 kgf-m 25.2 ft-lb R52W924A
7. Apply a sufficient amount of grease to the inner section of the steering rubber (1) and the spline inserting section (A) of the steering shaft before installation.
10-19
A/C AND INDEX HEATER
Hydraulic hose P : Red tag............ 49 N•m 5.0 kgf-m 36.0 ft-lb
FRONT STEERING AXLE SYSTEM
5. Make sure to follow the hydraulic hose tightening torque for the ports T, P, L and R of the steering unit. Hose T : Green Tag Band
