S76W671A
CLUTCH
ENGINE
GENERAL
6.2.3. REAR DIFFERENTIAL INSTALLATION
SAFETY FIRST
REAR AXLE - DISASSEMBLY, SERVICING AND ASSEMBLY
R69W731A
Dealer Copy -- Not forSSION Resale
TRANSMISSION TRANSMI SSION
5. After installing the spiral bevel gear (1) to the differential case, tighten the bolts (2) in diagonal direction. ����������= bolt (M10)....................... 48.0 ~ 55.9 N•m 4.9 ~ 5.7 kgf-m 35.3 ~ 41.0 ft-lb Apply ThreeBond® 1372 or equivalent onto the thread, and tighten the bolt to the ���� torque.
REAR HSTAXLE
•
TRANSMI HST
IMPORTANT
6. Insert the differential lock shift (1) in the hole groove and install the taper roller bearing (2).
R52W639D
A/C AND INDEX HEATER
1. Install the both differential bearing cases and differential assembly simultaneously. When installing the bearing cases, make sure to install the left part to the left section and right part to the right section. 2. Bearing case (LH) (boss-large) → Install to the left side of the transmission case. 3. Bearing case (RH) (boss-small) → Install to the right side of the transmission case.
HYDRAULIC ELECTRIC & DIAGNOSIS SYSTEM
S76W672A
HYDRAULIC STEERING SYSTEM
FRONT STEERING AXLE SYSTEM
FRONT BRAKE AXLE
REAR BRAKE AXLE
R69W732A
DR72-W00
209 of 450
7-23
