MAINTENANCE/ADJUSTMENTS
Removal
STEP 4
Tools required - A hammer - A bronze or brass drift - A flat-headed screwdriver STEP 1
CP99C007
Drive out the mounting pins with a bronze or brass drift. TRIM THIS EDGE
STEP 5
CP99F001
Place the hydraulic breaker laying on hard, flat ground. STEP 2
Alt= to hide template information Alt+ to display template information
REPLACING A TOOL ON A HYDRAULIC BREAKER (optional)
Stop the engine and remove the starter switch key.
CP99C008
Remove the tool. Use a lifting device if necessary. NOTE: If the hydraulic breaker is still on the machine, it may be easier to stick the tool in the ground and lift the hydraulic breaker off the tool. Make sure that the tool can not fall.
CP99C006
Push the rubber plate upwards (if fitted). Remove the retaining pins and plugs from both sides of the hydraulic breaker.
295
TRIM THIS EDGE RIGHT PAGE
Template Name: OM_1_col Template Date: 1994_04_29
STEP 3
