WHEELS AND TYRES

WARNING: A burst tyre can cause serious injury. Regularly check the condition of the tyres and always maintain the recommended inflation pressure depending on the type of tyre and the nature of the ground.

WARNING: When checking pressure or inflating a tyre, never stand in front of the tyre. Always face the tread. Always use an inflation cage when the wheel is removed from the machine. Keep all other people in the area away.

WARNING: Never weld close to a tyre. The tyre must be removed for all welding operations.

Tyre pressure

Service specifications

Check the pressure.......................................................................Every 100 hours Check the wheel nut torque..........................................................Every 250 hours (after 10 hours if the wheel has been changed or during the run-in period)

Wheel configuration and tyre type Recommended inflation pressure

4 wheels: 18x19.5 XF Front wheels Rear wheels

6 bar 6.5 bar

8 wheels: 10.00-20 PR16 7 bar 7 bar

Wheel retaining nuts

1

2

PDG0141 The retaining nuts are different for the 4wheel configuration and the 8 wheel configuration. To prevent the wheel nuts from becoming loose, the following part numbers should be installed:

Nut Part Number: (1) 4 wheel configuration: W2434501. (2) 8 wheel configuration: C1734501.