STEP 3
STEP 4
Run the engine for a few minutes, then check the level in the coolant reservoir again. Add coolant solution, if necessary.
Install the coolant reservoir cap. STEP 5 Install the lower tray under the operator’s compartment.
FUEL SYSTEM Fuel tank sediment removal ....................................... Every 10 hours or every day Fuel filter sediment removal ....................................... Every 10 hours or every day Fuel pre-filter sediment removal................................. Every 10 hours or every day Fuel filter replacement................................................................... Every 500 hours or when there is a loss of power Fuel pre-filter element replacement .............................................. Every 500 hours or when there is a loss of power Fuel tank capacity .....................................................................................249 liters Type of fuel....................................................................See “Fluids and lubricants”
Fuel pre-filter element replacement
STEP 2
Tools required - One filter strap wrench - One flat-headed screwdriver - One grease or oil can
TRIM THIS EDGE
Service specifications
Alt= to hide template information Alt+ to display template information
LUBRICATION/FILTERS/FLUIDS
PH08325
Apply a thin coat of oil or grease on the new filter seal. NOTE: Do not fill the new filter with fuel before installing it.
CD00B008
Clean the area around the filter head. Place a container of a suitable capacity under the filter and remove the filter using the filter wrench.
233
TRIM THIS EDGE RIGHT PAGE
Template Name: OM_1_col Template Date: 1994_04_29
STEP 1
