LUBRICATION/FILTERS/FLUIDS
COOLING SYSTEM Service specifications Template Name: OM_1_col Template Date: 1994_04_29
Coolant reservoir level check .......................................................... Every 10 hours or every day Check tightening of clamps and hoses ......................................... Every 250 hours Drain and rinse.............................................. Every 2000 hours or every two years System capacity .......................................................................................... 31 liters Thermostat range............................................................................... 82°C to 94°C Reservoir cap pressure .............................................................................. 1.03 bar
TRIM THIS EDGE
!
WARNING: Boiling coolant can spray out if the coolant reservoir cap is removed while the system is still hot. Before removing the cap, let the system cool down, then turn the cap to the first notch, and wait until the pressure is released. Then remove the cap.
!
WARNING: Check and service the cooling system according to the instructions given in this manual.
Coolant solution
Alt= to hide template information Alt+ to display template information
Only put ethylene-glycol and water coolant solution in the cooling system. Use good quality ethylene-glycol that has a high boiling point, with no additives to prevent leakage. Do not use non-approved anti-rust additives. Anti-rust additives and ethylene-glycol can mix and work against each other, thereby reducing anticorrosion protection, forming deposits in the cooling system and causing damage to the cooling system and radiator. Consult your CASE Dealer for a suitable coolant solution.
230
TRIM THIS EDGE LEFT PAGE
