2.5
Operation of the machine
2.5.15 Hopper The hopper is equipped with a cover (1) which prevents material from falling on the engine bonnet or to the area of the engine during loading of the material.
1
2
3
Procedure for the hopper cover operation: •
Before loading the machine with material open the hopper cover (1) by tilting it over in the machine travel direction so that the locking pin (2) fits into the counter-piece (3).
•
After loading the machine with material, close the hopper cover (1).
D451080
Before loading material to the machine always open and lock the hopper cover (1). During machine travel the hopper cover (1) must be in the closed position. Load the material to the machine according to Chapter 2.6.9. It is prohibited to load the material during machine operation; the machine must be parked on a flat and solid surface with the engine off. In case of mounting the material hopper extension, observe the mounting and safety instructions stated in the Mounting Manual.
90
F80W
