2.1 M ain safety precautions

2.1.17 Safety precautions for electrical and electronic equipment of the machine

• The machine is equipped with electrical wiring, components and electronic equipment, the operation of which can be interfered by external sources of electromagnetic radiation.

• This equipment is safe if operated in compliance with instructions given in this Operating Manual or other documentation supplied with the machine.

Please observe the following safety instructions concerning electrical and electronic equipment of the machine:

• Check the delivered goods for any damage immediately after delivery,

• Do not use damaged parts and instruments,

• Damaged electrical wiring and sockets represent a high safety risk and must not be used,

• In such cases, contact your local dealer or Dynapac. They will provide you with new undamaged parts.

Safety precautions

Electrical installations and wiring must be connected properly and according to data given in this Operating Manual.

Entire electrical wiring and connection components must be have adequate current rating within the meaning of valid regulations and they must meet requirements of respective national regulations.

All devices are only intended for industrial use and tested accordingly.

Observe all instructions for control and installation of electrical and electronic equipment according to this Operating Manual. Observe the correct polarity of connectors.

Ensure adherence to the prescribed supply voltage.

Check electrical wiring and connections of individual parts regularly with regard to trouble-free operation of the machine. The machine is equipped with fuses, which protect electrical and electronic equipment of the machine from short circuit. Observe prescribed values of individual fuses according to this Operating Manual or other documentation supplied with the machine.

Electrical and electronic equipment of the machine is not intended for operation in explosive environments.

Before installation and operation of instruments, make yourself familiar with and carefully read entire Operating Manual to these devices.

If you do not understand any part of the supplied Operating Manual or the instructions are unclear to you, contact your local dealer or Dynapac before putting the machine into operation.

In order to ensure smooth operation of Dynapac machinery, use only original spare parts supplied by Dynapac for repairs.

Dynapac does not assume any liability for additionally mounted equipment which is not authorised by Dynapac.

Dynapac assumes no responsibility in cases when the machine is operated incorrectly by not adhering to the instructions given in this Operating Manual, which may result in an injury or death, damage to the machine, property or environment.

Before starting works on electrical and electronic equipment of the machine when removing defects, always disconnect electrical wiring of the machine and instruments from the battery using a disconnecter. Failure to adhere to these instructions exposes you to a danger of injury of the machine operator and danger of damage to electrical and electronic parts of the machine.

It is prohibited to interfere in any manner with electrical and electronic parts of the machine. Special repairs can only be performed by an authorised service centre.

It is prohibited to use free connectors to connect other devices.

2.1.18 Prohibited activities

This chapter deals with main prohibited activities during operation, work, repairs and maintenance of the machine.

Guarantee and warranty claims cannot be applied in the following cases:

• faulty operation of the machine,

• insufficient or incorrectly performed maintenance of the machine,

• use of incorrect operating fluids,

• use and operation of the machine for other purposes than the ones stated in this Operating Manual.

Prohibited activities during machine control:

• The machine operator must not operate the machine without personal protective equipment.

• The machine operator must not leave the operator stand during operation of the machine.

• The machine operator may not operate the machine if he does not have a sufficient overview of the workplace and potential obstacles are not clearly visible. In such cases, a different efficient form of connection between the appointed worker and the machine operator must be ensured. To ensure connection between the appointed worker and the machine operator, we recommend using hand signals.

• The driver must not operate the machine under reduced visibility or at night unless the machine’s working area and the workplace are illuminated sufficiently.

• The machine operator must not use the machine after drinking alcoholic beverages and/or using drugs.

• The machine operator must not operate the machine in a different way than stated in this Operating Manual.

Failure to observe these prohibited activities may affect potential assessment of a claim and further continuation of warranty claims and warranty for the machine, which has been issued by the manufacturer - Dynapac.

Dynapac does not assume any liability for additionally mounted equipment which is not authorised by Dynapac.

Dynapac assumes no responsibility in cases when the machine is operated incorrectly by not adhering to the instructions given in this Operating Manual, which may result in an injury or death, damage to the machine or property.

• The machine operator must not transport other people on the machine, except for people appointed by the machine user.

• The machine operator must not operate the machine in the protective zone of electrical grid and transformer stations without observing respective national regulations.

• The machine operator must not cross electric cables if they are not properly protected against mechanical damage.

• The machine operator must not leave the machine or move away from the machine without taking measures to prevent its operation or spontaneous movement according to this Operating Manual.