LUBRICATION AND SERVICE PLAN

Engine oil:

Hydraulic oil:

Lubricating grease:

Anti-adherent solution:

Specification according to the country of machine operation

3.6 Lubrication and maintenance operations

Carry out lubrication and maintenance in defined intervals according to daily values on the counter of worked hours. This manual includes only basic information about the engine, other information is given in the engine operation and maintenance manual, which is a part of the documentation supplied with the machine.

Follow also the instructions given in the engine operation and maintenance manual!

Tighten dismounted or loosened screws, plugs, worm connections of the hydraulic system, etc. to tightening torque values according to tables in Chapter 3.6.33 unless a different value is specified for the respective operation.

Carry out maintenance works with the machine placed on a flat, solid surface and secured against any spontaneous movement, always with the engine off, and the key removed from the ignition box and with the disconnected battery disconnecter (unless required otherwise).

After 50 hours of operation of the new machine or after a general overhaul, carry out the operations according to Chapter:

3.6.19 Engine oil replacement

After 500 hours of operation of the new machine or after a general overhaul, carry out the operations according to Chapter:

3.6.29 Hydraulic oil and hydraulic oil filter replacement