2.1
Main safety precautions
2.1.17 Safety precautions for electrical and electronic equipment of the machine
Safety precautions
•
The machine is equipped with electrical wiring, components and electronic equipment, the operation of which can be interfered by external sources of electromagnetic radiation.
•
This equipment is safe if operated in compliance with instructions given in this Operating Manual or other documentation supplied with the machine.
Entire electrical wiring and connection components must be have adequate current rating within the meaning of valid regulations and they must meet requirements of respective national regulations.
Please observe the following safety instructions concerning electrical and electronic equipment of the machine:
Electrical installations and wiring must be connected properly and according to data given in this Operating Manual.
All devices are only intended for industrial use and tested accordingly. Observe all instructions for control and installation of electrical and electronic equipment according to this Operating Manual. Observe the correct polarity of connectors.
•
Check the delivered goods for any damage immediately after delivery,
•
Do not use damaged parts and instruments,
Check electrical wiring and connections of individual parts regularly with regard to trouble-free operation of the machine.
•
Damaged electrical wiring and sockets represent a high safety risk and must not be used,
The machine is equipped with fuses, which protect electrical and electronic equipment of the machine from short circuit.
•
In such cases, contact your local dealer or Dynapac. They will provide you with new undamaged parts.
Observe prescribed values of individual fuses according to this Operating Manual or other documentation supplied with the machine.
Ensure adherence to the prescribed supply voltage.
Electrical and electronic equipment of the machine is not intended for operation in explosive environments.
Before installation and operation of instruments, make yourself familiar with and carefully read entire Operating Manual to these devices. If you do not understand any part of the supplied Operating Manual or the instructions are unclear to you, contact your local dealer or Dynapac before putting the machine into operation. In order to ensure smooth operation of Dynapac machinery, use only original spare parts supplied by Dynapac for repairs. Dynapac does not assume any liability for additionally mounted equipment which is not authorised by Dynapac. Dynapac assumes no responsibility in cases when the machine is operated incorrectly by not adhering to the instructions given in this Operating Manual, which may result in an injury or death, damage to the machine, property or environment.
50
Before starting works on electrical and electronic equipment of the machine when removing defects, always disconnect electrical wiring of the machine and instruments from the battery using a disconnecter. Failure to adhere to these instructions exposes you to a danger of injury of the machine operator and danger of damage to electrical and electronic parts of the machine.
It is prohibited to interfere in any manner with electrical and electronic parts of the machine. Special repairs can only be performed by an authorised service centre. It is prohibited to use free connectors to connect other devices.
F80W
