3.1
Safety and other measures during maintenance of the machine
3.1.1
Safety precautions during machine maintenance
Lubrication, maintenance and adjustment process shall be performed: •
by professionally qualified and trained personnel,
•
according to intervals given in the Operating Manual,
•
in compliance with safety warnings given in the Operating Manual,
•
on the machine standing on a flat and solid surface and secured against movement with wedge blocks, always with the engine off, the key removed from the ignition box and the battery disconnecter disconnected,
•
with the "Machine repair" tag attached to the steering wheel (the tag is supplied with the machine accessories),
Always start and operate the engine in a well-ventilated area. If in an enclosed area, vent the exhaust to the outside. Do not modify or tamper with the exhaust system. Do not idle the engine except as necessary.
After the adjustment or maintenance is completed, check all safety devices for proper operation!
2775
2775bz
•
on cold machine parts,
•
there is a danger of burning after operating fluids warm up during certain tasks of inspection or maintenance of the machine,
•
after the machine, lubrication points and maintenance places have been cleaned,
•
using suitable, undamaged tools,
•
by replacing parts with new original parts according to the spare parts catalogue,
•
with sufficient lighting of the entire machine during reduced visibility and at night,
•
reinstall all removed covers and safety elements after the work is completed,
•
re-tighten bolted connections according to the specified tightening torques.
When using a steam cleaning machine, use protective clothes and safety glasses or a face shield and a protective helmet. Hot steam can cause serious injuries. Spilt fuel on a hot surface or electric parts can cause fire. Fire can consequently cause serious injuries. Never place your head, body and arms under the parts of the machine which are not firmly fixed to the machine or secured against spontaneous fall. If you need to perform repair or maintenance in areas which are not accessible from the ground, use ladder or a platform with stairs which comply with respective national regulations to reach the working area. Unless any platform with stairs or a ladder are available, use only handles and foot plates the machine is equipped with. By failure to observe these rules you expose yourself to the danger of injury by falling down of the machine. Do not use petrol, diesel oil, thinners or other flammable liquids to clean parts of the machine. Use approved commercial solvents which are non-flammable and non-toxic.
F80W
123
