Workshop
Maintenance work Every 10 s/h
“A” 1st Inspection1 at 100 s/h
“B” every 500 s/h2 2nd Inspection
“C” every 1500 s/h once a year
• Check, retighten and if necessary, replace V-belts 9
●
●
●
●
●
• Check flexible lines of fuel system for damage
●
●
●
●
●
●
●
●
●
●
For service and maintenance work on the attachment, please refer to the operation and maintenance manual of the attachment manufacturer as well.
Other inspection work (
Maintenance work Every 20 s/h
Delivery inspection
3.4 Maintenance plan (overview)
Operator/driver
):
●
• Check the fuel/water separator. Drain water if necessary • Battery: check charge condition • Heating: clean the fine-dust filter
10
(replace every 500 s/h)
• Air conditioning (option): check coolant level, clean compressor and condenser
11
●
●
●
●
●
●
●
●
• Check service and parking brake
●
●
●
●
●
• Tyre check (damage, air pressure, tread depth)
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
• Check optional trailer coupling (damage, wear) 12
• Check and readjust slide plates on telescopic boom. Replace if necessary Check screws and nuts or screw connections for tightness on the following assemblies/components. Retighten if necessary • Diesel engine and engine suspension ●
Serv-HB 40702 – Edition 2.0 * 407-02s0321_Wartungsplan.fm
• Steering system
●
●
●
●
●
• Driving and work hydraulics system
●
●
●
●
●
• Telescopic boom (pin locking), quickhitch lock
●
●
●
●
●
• Axle mounting, axle suspension
●
●
●
●
●
• Fastening screws of cardan shafts
●
●
●
●
●
• Fastening screws of cab
●
●
●
●
●
• Wheel nuts
●
●
●
●
●
• Electrical system: check electric and earth connections, chafing on wiring harness, battery terminals
●
●
●
●
●
Maintenance and service work
3-6
Workshop
