1 minute read
Front/rear working lights
Due to leakage and overpressure control in the steering hydraulics, the front and rear axle wheels of the machine no longer follow the same track when driving straight-ahead after extended operation. The steering system must be synchronised from time to time.
Danger!
In order to avoid danger of accidents, synchronising the steering is not allowed when working off-road or when driving on public roads!
Synchronising with 4 wheel steering (standard)
☞ Proceed as indicated in the Operator’s Manual •Select a drive range •Select the driving direction with the switch on the control lever •At low drive speed, turn the steering wheel to the left or right as far as it will go and try turning it even further in the end position against the pressure for a few seconds •Turn the steering wheel rapidly back to straight-ahead position ➥ Perform a test run to check that the front and rear wheels run in the same track
Notice!
Contact your dealer if this does not synchronise the wheels.
