Hydraulic connections 3rd control circuit (additional control circuit as an option

Entering/changing the personal code

Enabling the drive interlock Notice!

The personal code must be entered correctly twice consecutively otherwise an error is indicated by means of a single flashing of the LED: • Codes consisting of 3 and less, or of more than 6 digits are ignored by the system • Simple codes (with identical or consecutive digits, e.g. 1, 2, 3, 4) are rejected by the system with four short acoustic signals • Entering a new personal codes replaces the previous code. A code can be changed any time if the main code is known

In order to enter or modify the personal code, disable the drive interlock by entering the main code (6 digits) and pressing the (*) key: ☞ Proceed as follows: •Turn the ignition key to 1 ➥ The LED comes on for 2 seconds •Enter the new personal code within 20 seconds and confirm it with the (*) key after the LED has gone out •Enter the new personal code again and confirm it with the (*) key after a short flashing of the LED ➥ Confirmation: LED flashes twice briefly, then comes on for 2 seconds •Turn the ignition key to the zero position and remove it ➥ The new personal code is now set and can be used for disabling the drive interlock.

☞ Stop the diesel engine and remove the ignition key ➥The drive interlock is automatically enabled ➥Flashing LED (on the keypad)