1 minute read
Multifunctional lever – turn indicators, headlights, wipers
3.4 Maintenance plan (overview)
For service and maintenance work on the attachment, please refer to the operation and maintenance manual of the attachment manufacturer as well.
Other inspection work ( ):
• Check, retighten and if necessary, replace V-belts9 • Check flexible lines of fuel system for damage • Check the fuel/water separator. Drain water if necessary
Workshop Operator/driver
inspection Delivery Every 10s/h work Maintenance Every 20s/h work Maintenance Workshop
at 100 s/h 1st Inspection
1 “A” 2nd Inspection every 500s/h 2 “B” once a year every 1500s/h
• Battery: check charge condition • Heating: clean the fine-dust filter10 (replace every 500s/h) • Air conditioning (option): check coolant level, clean compressor and condenser11 • Check service and parking brake • Tyre check (damage, air pressure, tread depth) • Check optional trailer coupling (damage, wear) • Check and readjust slide plates on telescopic boom. Replace if necessary 12 Check screws and nuts or screw connections for tightness on the following assemblies/components. Retighten if necessary • Diesel engine and engine suspension ● ● ● ● ●
• Steering system ● ● ● ● ●
• Driving and work hydraulics system • Telescopic boom (pin locking), quickhitch lock • Axle mounting, axle suspension • Fastening screws of cardan shafts • Fastening screws of cab • Wheel nuts ● ● ● ● ●
• Electrical system: check electric and earth connections, chafing on wiring harness, battery terminals ● ● ● ● ●
