Brake fluid tank

3.4 Maintenance plan (overview)

For service and maintenance work on the attachment, please refer to the operation and maintenance manual of the attachment manufacturer as well.

Oil and filter changes ( ) (check the oil levels after a test run):

• Engine oil • Engine oil filter • Fuel filter • Air filter insert 3, 4 replace safety cartridge every 3rd time the air filter insert is replaced • Front and rear differentials • Gearbox (flanged onto front axle) • Planetary drives (left and right) of front and rear axles • Hydraulic oil5 • Hydraulic oil filter insert/return filter • Hydraulic oil tank breather filter 4 • Heating fine-dust filter10 (in cab)

Inspection work ( ):

• Condition of paint coating • Engine oil (level) • Hydraulic oil (level) • Gearbox oil in gearbox (level) • Gearbox oil in front and rear axle differential (level) • Gearbox oil in front and rear axle planetary drives (left and right) (level) • Check brake fluid6, fill up if necessary (use LHM brake fluid) • Check water/oil radiator (diesel engine/hydraulic oil) for dirt, clean if necessary7, 8 • When using biodegradable hydraulic oil: drain the condensation water in the hydraulic oil tank 5 • Clean the dust valve on the air filter3

Workshop Operator/driver

inspection Delivery Every 10s/h work Maintenance Every 20s/h work Maintenance Workshop

at 100 s/h 1st Inspection

1 “A” 2nd Inspection every 500s/h 2 “B” once a year every 1500s/h “C”