1 minute read
12 V socket
Additional control circuit operation
111
A
B 125
97
☞ Operate as follows if an attachment is connected: •Slide the lock in switch 111 in the direction of the arrow and press the switch to position B •Press switch 125 to position AorB (control circuit selection) •Turn potentiometer 97 (rotary switch on switch console on the right) as required ➥ A => less, B => more oil
Notice!
If switches 111 and/or 125 are still switched on when starting the diesel engine, the additional control circuit is locked for safety reasons. Furthermore, the quantity of oil is automatically reset to minimum when starting the diesel engine. • Switch off switches 111 and 125 and switch them on again (see above) • Turn back potentiometer 97 (rotary switch) to minimum A and then reset the required quantity of oil
Fig. 19: Additional control circuit connections (overview)
Notice!
Important! Before stopping the diesel engine, turn back potentiometer 97 (rotary switch) to minimum A and switch off switch 111. If switch 81 is unintentionally switched off and on during operation, the quantity of oil previously adjusted remains unchanged.
