Hydraulic oil tank filler inlet

1.4 Fields of application and using a machine with an attachment

Important notice on use

The use of the telehandler will be decided in the first place by the attachments (see table)

Authorised attachments Caution!

In order to avoid damage to the machine, only the attachments listed in the table have been certified for installation on the machine! Attachments that are not listed require an EBE (separate certification for vehicles) made out by the competent authority!

Note that not all the indicated attachments comply with local traffic regulations. The attachments complying with German road traffic regulations and the applicable provisions are listed in the General Certification for Vehicles(Germany) or the data confirmation (Germany)!

Get informed on and follow the legal regulations of your country.

Attachment1

Standard bucket – normal material2

Standard bucket – lightweight material2

Standard bucket – superlightweight material2, 4

Pallet forks2, 5, 6, 7

Attachment type no. Dimensions Struck/ heaped (m³) Use

1000249215 2000 mm (with teeth) 10002491953 2000 mm (without teeth) 0.70/0.85 Loosening, picking up, transporting and loading loose or solid material (material density  p = 1.8 t/m³)

10002492423 2150 mm (without teeth) 1.0/1.2

Picking up, transporting and loading lightweight material (material density  p = 1.3 t/ m³) 10002493073 2300 mm (without teeth) 1.5/1.8 Picking up, transporting and loading grain (material density  p = 0.7 t/m³) 1000251708 1000 mm

1000247817 1200 mm Load diagram Picking up and transporting pallets

1. Get informed on the legal regulations of your country for information on mounting attachments 2. Bear in mind the safe load indicator when working with this attachment 3. With screwed-on bucket blade 4. Authorised for use on public roads only if the machine is fitted with additional reflectors on the left/right and rear lights 5. Only with load diagram for telehandler 6. Not authorised for use on public roads 7. See the Operator’s Manual of the attachment for putting the attachment into operation and using it