Operator/driver
Workshop “B” every 500 s/h2 2nd Inspection
“C” every 1500 s/h once a year
●
●
●
• Engine oil filter
●
●
●
• Fuel filter
●
●
●
●
●
Oil and filter changes (
) (check the oil levels after a test run):
replace safety cartridge every 3rd time the air filter insert is replaced
• Front and rear differentials
●
●
• Gearbox (flanged onto front axle)
●
●
• Planetary drives (left and right) of front and rear axles
●
●
• Hydraulic oil
5
Maintenance and service work
• Air filter insert
3, 4
Maintenance work Every 20 s/h
• Engine oil
For service and maintenance work on the attachment, please refer to the operation and maintenance manual of the attachment manufacturer as well.
Maintenance work Every 10 s/h
“A” 1st Inspection1 at 100 s/h
3.4 Maintenance plan (overview)
Delivery inspection
Serv-HB 40702 – Edition 2.0 * 407-02s0321_Wartungsplan.fm
Workshop
● ●
• Hydraulic oil filter insert/return filter • Hydraulic oil tank breather filter
●
10
• Heating fine-dust filter (in cab) Inspection work (
●
4
●
●
): ●
• Engine oil (level)
●
●
●
●
●
• Hydraulic oil (level)
●
●
●
●
●
• Gearbox oil in gearbox (level)
●
●
●
• Gearbox oil in front and rear axle differential (level)
●
●
●
• Gearbox oil in front and rear axle planetary drives (left and right) (level)
●
●
●
6
●
• Check brake fluid , fill up if necessary (use LHM brake fluid) • Check water/oil radiator (diesel engine/hydraulic oil) for dirt, clean if necessary
7, 8
• When using biodegradable hydraulic oil: drain the condensation water in the hydraulic oil tank • Clean the dust valve on the air filter
3
●
●
●
●
●
●
●
●
●
●
●
●
5
●
●
3-5
Maintenance and service work
• Condition of paint coating
