MAINTENANCE/ADJUSTMENTS
ADJUSTING ROCKER ARM CLEARANCE Service specifications Template Name: OM_1_col Template Date: 1994_04_29
Check .......................................................................................... Every 1000 hours NOTE: Have it checked by your CASE Dealer.
INSPECTING AND CLEANING THE MACHINE Service specifications Inspect and clean ........................................................................ Every 1000 hours Or, if oil or grease has been spilled on the machine, clean off using steam or a high pressure hose.
During the inspection and cleaning operation, inspect all welded components (for possible cracks), the attachment linkages, the teeth and their adaptors for wear and correct fastening. Locate any possible leaks and check the condition of the lines and hoses.
TRIM THIS EDGE
INSPECTING THE TURNTABLE BEARING Service specifications Inspect ........................................................................................ Every 1000 hours (after the first 50 hours of the run-in period)
Alt= to hide template information Alt+ to display template information
Check the tightness of the turntable bearing hardware both visually and manually. Check on both the upperstructure side and the undercarriage side. In the event of problems contact your CASE Dealer.
270
TRIM THIS EDGE LEFT PAGE
