OPERATING INSTRUCTIONS
STARTING THE ENGINE STEP 3
NOTE: If the machine has not been used for some time, see “Starting up after storage” in the “Storage” Section. NOTE: If you have to start the engine using booster batteries, see “Booster batteries” in the “Electrical System” Section. STEP 1 PH07517
Make sure that the travel control lever is in the neutral position.
TRIM THIS EDGE
STEP 4
PH07613
Switch on the electrical system, using the battery master switch key.
Alt= to hide template information Alt+ to display template information
NOTE: In cold weather, see “Starting the engine in cold weather”.
STEP 2
PH07426
Leave the left-hand control arm in the raised position.
115
TRIM THIS EDGE RIGHT PAGE
Template Name: OM_1_col Template Date: 1994_04_29
CD99N012
Turn the starter switch key to the “On” position. The alarm will sound for a few seconds and then stop.
