Case 1188 “Plus” Wheeled Excavator Operator's Manual 6-23630 GB - PDF DOWNLOAD

Page 115

OPERATING INSTRUCTIONS - Familiarize yourself with the machine emergency exits (emergency exit via the windshield) in case of the cab door being jammed or the machine turning over. See “Windshield” in the “Instruments/Controls/Accessories” Section.

Template Name: OM_1_col Template Date: 1994_04_29

- Make sure that there is nobody on or under the machine. The operator must be the only person on the machine. - Make sure there is nobody within the machine’s working area. - Familiarize yourself with the safety measures in use on the job site.

MACHINE OPERATION

!

WARNING: Check all controls and safety devices in a safe, open area before starting work.

When operating the machine, follow these instructions: - When starting the engine, allow for the prevailing weather conditions. See “Starting the engine”.

TRIM THIS EDGE

- Check the hourmeter regularly, to ensure that all service operations are carried out punctually. See the “Service Intervals” Section. - If you use your machine in particularly harsh conditions (dusty or corrosive atmosphere), the service intervals should be reduced accordingly. - See “Run-In period” if the machine is new or if the engine has been reconditioned.

Alt= to hide template information Alt+ to display template information

- Locate the position of any underground pipes or conduits before starting work. - When working near overhead high voltage electric lines, you must keep a safe working distance from the lines. The minimum distances to be respected are as follows: - Under 57 000 volts: 3 meters. - Over 57 000 volts: 5 meters. - When working on a public highway, use the standard traffic signs, taking into consideration the working range of the upperstructure and its attachments. Local or national regulations stipulate the number, type and location of reflector strips. - Operate the working or travel controls only when seated in the operator’s seat. - Always make allowance for the working conditions when operating the machine. See “Operating instructions” in the “Job Site and Road Operation” Section.

112

TRIM THIS EDGE LEFT PAGE


Turn static files into dynamic content formats.

Create a flipbook

Articles inside

OVERALL ROAD TRAVEL DIMENSIONS

1min
page 360

BUCKETS

1min
page 342

AIR CONDITIONING

3min
pages 305-307

REPLACING A BACKHOE BUCKET SIDE CUTTER

1min
page 275

ENGINE

1min
page 334

HYDRAULIC SYSTEM

1min
page 335

BOOSTER BATTERIES

1min
page 320

TEETH AND TOOTH TIP WEAR LIMITS

1min
page 274

REPLACING A BACKHOE BUCKET TOOTH TIP

1min
page 273

INSPECTION AND MAINTENANCE OF THE QUICKCOUPLER

1min
page 272

RADIATOR AND OIL COOLER

1min
page 268

ENGINE ALTERNATOR BELT AND FAN

1min
page 269

HEATING UNIT FILTER

1min
page 267

RELEASING PRESSURE IN THE HYDRAULIC SYSTEM

1min
page 234

COOLING SYSTEM

3min
pages 225-228

FUEL SYSTEM

4min
pages 229-233

ENVIRONMENT

1min
page 192

HOURMETER

1min
page 185

SERVICE INSTRUCTIONS

1min
page 184

LOAD HANDLING

1min
page 182

SERVICE INTERVALS CHART

2min
pages 186-188

JOB SITE AND ROAD OPERATION ..................................................... 156

1min
page 183

WORKING INSTRUCTIONS

6min
pages 176-181

PM type, special for Germany

2min
pages 172-173

FASTENING THE CASE CLAMSHELL FOR ROAD TRAVEL (P type FASTENING THE SHORT CLAMSHELL FOR ROAD TRAVEL

3min
pages 168-171

TOWING THE MACHINE IN AN EMERGENCY

1min
page 143

TRANSPORTING THE MACHINE

5min
pages 128-133

SPECIAL CONDITIONS OF USE FOR THE HYDRAULIC BREAKER

1min
page 127

CAB REMOVAL AND INSTALLATION

2min
pages 136-138

OPERATING THE DOZER BLADE/STABILIZERS FROMTHE OPERATOR’S COMPARTMENT (P2ALversion) with independent dozer blade/stabilizers

2min
pages 152-154

ELECTRIC TRAVEL

1min
pages 150-151

TOWING THE MACHINE

3min
pages 139-142

OPERATING THE MACHINE IN COLD WEATHER

1min
page 120

OPERATOR’S SEAT

2min
pages 83-85

FORWARD VIEW MIRROR ANDREARVIEWMIRRORS

1min
page 90

HEATING AND VENTILATION

1min
page 89

FRONT LOWER WINDOW

1min
page 88

STARTING THE ENGINE IN COLD WEATHER

1min
page 118

RUN-IN PERIOD

1min
page 114

MACHINE OPERATION

2min
pages 112-113

STARTING THE ENGINE

4min
pages 115-117
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.