1.28 Driving with automatic transmission After starting the engine before turning on the transfer, press the brake pedal. When the transmission and the brake released, the car starts moving. Do not press both the accelerator and brake pedals. While D can ride in almost any conditions. With a soft uniform squeezing the accelerator pedal is timely gear changes, providing fuel economy. Manual switching is necessary only in exceptional cases. Third, second or first choose a transfer only if switching to higher transfer undesirable, or when engine braking. How to only allow traffic situation, switch back to mode D. Indicator gearbox Indication regime and enabled the transfer is displayed (Figure 1.221).
Fig. 1.221. Indicator Automatic co-shy Transmission Gearshift lever (modes P, R and N) P - parking regime. In this mode, the vehicle's wheels are blocked.
Fig. 1.222. Lever switching modes Automatic boxes Transmission Include it only in the stationary vehicle and tightened parking brake. The display shows the transmission symbol R. R - reverse mode. Include it only in the stationary vehicle. The display shows the transmission symbol R. N - neutral position or idling. The display shows the transmission symbol N. Gearshift lever can be switched from the position P only when the ignition key and pressing the brake pedal (to lock the gear lever). To activate the P or R, press the button on the selector lever. Start the engine is possible only in position P or N. When starting the engine in position N in addition make the most of the main brake pedal or turn on the parking brake. During the gear shift does not squeeze the accelerator pedal. Profiles movement (D, 1, 2, 3 and 4) Permanent position for normal driving conditions - on transfers from the 1 st to 4 th. Transmission will not switch above the established level.
Fig. 1.223. Indication regime D Auto-matic boxes Transmission on Decision-making display
85
