1.24 Seats The seats, headrests, seat belts and airbags protect people in the car. When planting in the car to adjust the head restraint so that the tip of the head restraint is at the top of the head. Do not install the front seats too close to the control panel. The driver must hold the steering wheel, so that his hands were in the points corresponding to 10 and 2 h on the dial clock, and elbows were slightly bent. The legs should also be slightly bent, the driver had the opportunity to press the pedal until it stops. Seat belt must pass through the center of the shoulder. Belt should tightly enfold hips, not stomach. Slide the front passenger seat back as far as possible. Seat backs should not be too rejected. Recommend installing seat-back angle of about 25 °.
Fig. 1.161. Proper Planting on vodi telsom seat Shift Seats forward, backward and up
Fig. 1.162. Moving Seats For-ward, backward and up To adjust the seat pull up the lever located on the outer front edge of the base seat. Letting go of the lever, push the seat to ensure the reliability of fixing the latch. Adjust the height of the seat with a lever located on the outer side of the seat cushion. NOTICE Prohibited move seats in time drive. When elongated ry-chage they may suddenly shear o.s. Adjustment angle torso Seat Turn the knob located on the outer side of the seat cushion. If the seats are shifted all the way forward, the seat backs can be thrown back in full.
Fig. 1.163. Adjustment angle torso Seat
64
