Additional nozzles are located under the windshield and side windows, as well as the front in the lower area near the floor. Heated front seats
Fig. 1.127. Keys include heating front seats Depending on the desired degree of heating press for the inclusion of the seat once or several times. Indication of the inclusion of one of the three steps is carried out an alarm indicating a key. NOTE People with high sensitivity skin not recommended -expendable use heating at most high stage. In order to turn off the heating, press. If the alarm goes off in the key, then heating is turned off. NOTE Heated Seats performed only at running engine.
1.15 Automatic mode electronic climate control This mode performs automatic compensation of temperature changes due to external influences such as sunlight. The indication is realized on the information display. Changes in individual parameters briefly displayed on the information display. Thus the currently displayed menu overlaps indication parameter. Depending on the model of the display image may be different. When locking the car using the remote control device settings climate control system are stored in memory for the corresponding remote control device. It is possible to set the phone manually via the menu on the display. When the cooling (air conditioning compressor) is cooling and drying. Micro-filter cleans the air entering the outside air from dust and soot, as well as pollen and spores. Automatic circulation system air Automatic air circulation system with air quality sensor registers the presence of harmful gases surrounding and automatically switches to a mode of circulation. In automatic mode, climate control maintains optimal parameters in almost any conditions. If necessary, climatecontrol settings can be configured manually. Features climate control fully available only when the engine is running. At low ambient temperatures cooling (air conditioning compressor) switches off automatically. Automatic mode To enable automatic climate-control mode, press «AUTO», open all the blowing nozzle, turn the air conditioner compressor, and then left the set temperature control at 22 ° C (Fig. 1.128).
Fig. 1.128. Enable automatic mode
51